On-Site,
Start to Finish.
No hauling parts to a shop, no curing chemicals, no grit to sweep up. We bring the laser and the power to you and hand back a ready-to-coat surface, same day on most jobs.
Four Steps. One Clean Surface.
Assess
We look at the surface, the contaminant, and the material underneath, then dial in settings, and the right beam (pulsed or continuous-wave), that remove one without harming the other. On most jobs we run a free test patch so you see the result before you commit.
Set Up
Our mobile unit and generator roll up to your site. Minimal containment: no blasting booth, no wash-down station, no shipping parts out for days.
Clean
The laser vaporizes rust, paint, grime, or soot and stops at the solid material beneath, leaving the base surface intact. Fumes are captured at the head, so there's no grit and no chemical runoff.
Inspect
We walk the finished surface with you: clean, dry, coat-ready, and a tidy site. Most jobs wrap the same day.
Clear, Clean, and Quick.
You'll get a clear scope and a same-week estimate, a free on-site demo on a small patch so you can see it for yourself, and a finished surface that's ready for coating or inspection right away. No solvents to air out, no media to dig out of seams, no asset tied up for days.
See It on Your Own Surface.
Watch the laser clean a small patch of your own rust, paint, or soot. Free, on-site, no obligation.
(509) 714-6263Licensed, bonded & insured · Lic. PULSALC741LS · ANSI Z136.1 / OSHA-trained · Spokane & North Idaho