Paint & coating removal
Strip Paint & Coatings, Layer by Layer.
Strip old paint, powder coat, and primer down to a clean, sound, paint-ready substrate, no sanding dust, no media stuck in the seams, and no chemicals to contain or dispose of.
BeforeAfter
Truck fender, coating to bare metal · drag to compare
How it works
Controlled, Layer-by-Layer Removal.
The laser ablates coatings one layer at a time, and you control how deep it goes, knock back a single layer or take it to bare substrate. Because the beam stops at the solid material underneath, the surface comes off clean and undamaged, ready to recoat.
What it takes off
- ✓Paint, primer & powder coat
- ✓A single layer or down to bare substrate
- ✓Steel, aluminum, brick & concrete
- ✓Tight seams, edges & detail work
Why it beats chemical & media stripping
- ✓No chemical strippers or wash-water runoff
- ✓No blast media buried in seams and cavities
- ✓Dial the depth, selective, not all-or-nothing
- ✓Leaves a surface new coatings bond to
Where we use it
Where Paint Removal Shines.
› Restoration & refinishing
› Fabrication & manufacturing
› Marine hulls & hardware
› Signage & architectural metal
› Automotive panels & frames
› Historic & detailed surfaces
Strip It Clean.
Tell us what's coated and what's underneath, we'll bring the laser out for a free on-site demo on a small area, no obligation.
(509) 714-6263Licensed, bonded & insured · Lic. PULSALC741LS · ANSI Z136.1 / OSHA-trained · Spokane & North Idaho